DECON MP195-25
Decon inoculating loops are made of high
quality, twisted nichrome wire which is
designed to cool rapidly after flaming. The
loops slide smoothly across the agar surface
without tearing or gorging. Decon loops are
made to be used with Decon's brass holders.
Non-Calibrated Loops:
Small = 2.26 mm I.D. = 2.45 uL
Medium = 2.91 mm I.D. = 3.41 uL
Large = 3.57 mm I.D. = 5.45 uL
Calibrated Loops:
1 uL (0.001 mL) and 10 uL (0.01 mL)
inoculating loops are individually calibrated
in accordance with ASM/APHA via Evans
Blue Dye Test which is a CAP approved
method. Calibration Certificates are sent
with calibrated loops or are available from
Decon Labs.
Decon inoculating loops can be used and
flamed many times before degrading the
nichrome wire. Once degradation occurs,
dispose of loop and attached a new loop to
the handle.
Manufactured to critical tolerances, Decon
inoculating loops can be used in quantitative
procedures such as urine counts, etc.
Loops slide smoothly across agar surfaces without tearing or gouging
The nichrome wire cools rapidly, saving time
Loops are available calibrated or noncalibrated
Calibrated in accordance with ASM/APHA via Evans Blue Test and include calibration certificates
LeLoop™ loops come without holders, which are available separately