THERMO 50157877
Smart2Pure™ Pro Water Purification System
Model:
Smart2Pure Pro 16 UV/UF
Total Organic Carbon (TOC):
No
RO Flow Rate:
16L/hr
Product Water Type:
Type 1 and 2
Operating Pressure Range:
1 to 6 bar
Includes:
RO/pretreatment cartridge, an ultrapure polisher cartridge, sterile 0.1 μm filter, UV lamp, UF filter, 60 L tank, CO2 vent filter, sterile overflow and system wall bracket
thermo scientific™ Smart2Pure™ Pro Water Purification System
The Smart2Pure™ Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water.
- Automatic Standby mode when system is not in use recirculates water through system to maintain purity
- Leak detector shuts off water supply and system if leak is detected
- Alerts show on display when to replace consumables
- Reverse osmosis water quality monitoring
- Inline ultrafilter with large surface area to remove endotoxins and nucleases.
- System parameters are code-protected to prevent accidental changes to set points
Thermo Fisher Scientific
Model:
Smart2Pure Pro 16 UV/UF
Total Organic Carbon (TOC):
No
RO Flow Rate:
16L/hr
Product Water Type:
Type 1 and 2
Operating Pressure Range:
1 to 6 bar
Includes:
RO/pretreatment cartridge, an ultrapure polisher cartridge, sterile 0.1 μm filter, UV lamp, UF filter, 60 L tank, CO2 vent filter, sterile overflow and system wall bracket
Flow Rate:
1L/min
Feed Water Inlet:
Municipal Tap Water
Electrical Requirements:
100/240V 50/60Hz
Conductivity:
Type 1: 0.055μS/cm Type 2: 0.067 to 0.1μS/cm