PLAS 825-PCR/HEPA

The #825-UVC is designed to help improve the accuracy of P.C.R. and general tissue culture procedures. The chance for air borne contamination during D.N.A. sequencing is greatly reduced.

The chamber is a “still air enclosure” which contains both our “Bright Light” illumination system and a U.V. germicidal lamp. The U.V. germicidal system is rated at 254nm and will decontaminate all exposed surfaces in the interior. The lamp timer should be activated 15 minutes before and 15 minutes after each use. The front viewing panel Catalog #825-UV(FS) is attached by six (6) screws and is easily and quickly replaced, if needed. Access to the interior of the chamber is gained by pulling swinging doors outward.

The 36in wide 825-PCR/HEPA/36 is latest product to the line of PLAS-LABS' PCR Chambers. The 825-PCR/HEPA/36 includes many of the same features as our standard PCR Chambers, but includes nine (9) cubic feet of capacity, eight (8) adjustable interior shelves, larger HEPA filter, and extra large U.V. emiting light for increased sterilization. 

New self closing hinges have eliminated the need for locks. The doors are removable, therefore do not take up valuable lab counter space. If a corner door is accidently opened, proximity sensors turn off the U.V. system for operator safety.

Features:

• “Bright Light” illumination system (40,000 hour lamp guarantee).
• Two bright white plastic (adjustable) shelves. One is tooled to store pipettors.
• Front panel is .375in thick optically clear material (9.5mm) for Beta Ray protection. NOTE: Not Gamma Rays. This thickness helps to prolong the service life (about 2,500 operating hours) of the unit.  
• Removable side access doors with slip apart hinges.
• Proximity sensors on doors for operator safety.
• Automatic timer to activate U.V. sterilization procedures.
• Bottom tray has a formed in place “spill guard” for easy cleaning.
• The U.V. system is rated at 254nm. UV lamps must be activated 15 minutes prior to and 15 minutes after planned use.
• Standard 24 month warranty (Not gloves or consumables).
• Side and back walls are one piece formed optically clear acrylic .375in thick (9.5mm).
• Main housing and top are removable for installation of large pieces of equipment.
• Pipette holding shelf included.