Labconco® Basic™ 47 and Basic™ 70 Laboratory Hoods
Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of powder-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.
The hood is furnished with a 0.5cm (3/16in) thick safety glass and a 25.4cm (10in) diameter. The hood is available with or without a blower, which can be mounted in or above the hood or on the roof. A 1/3 hp motor is included with Basic 47 hoods that have a blower (except LCN 2247500 and 2247501, which have a 1/2 hp motor). Basic 70 hoods with a blower have a 3/4 hp motor.
The interior and exterior are constructed of glacier-white, epoxy-coated, 16-gauge steel. The hood includes a removable front panel, a removable air foil, a two-piece adjustable baffle, and a vapor-proof, incandescent light fixture. The right-side fixture panel is factory prepared to accept up to three service fixtures, one duplex electrical receptacle, and a Guardian air monitor. The right, interior side wall is factory prepared for one wall-mounted cup sink with a turret, and the hood liner top is constructed for two customer-supplied apparatus rods.
- By-pass airflow design
- Durable glacier white powder-coated 16 gauge steel exterior and interior resists chemical exposure
- Vertical-rising tempered safety glass sash
- Adjustable two-piece baffle
- Curved air foil that lifts off for cleaning
- Removable front panel for access to electrical wiring
- Right side fixture panel factory-prepared to accept up to three service fixtures, one electrical duplex and one airflow monitor (kits sold separately)
- Right interior wall factory-prepared for one cupsink and turret (cupsink and turret kit sold separately)
- Powder-coated steel 10.3in OD exhaust connection
- ETL listed (115V models)
- CE conformity (220V models)
Options:
- 4ft and 6ft widths
- Versatile built-in blower that mounts on top of the hood liner, above the hood or at a remote location
- Explosion-proof light and blower
- International electrical configurations
- Unassembled hoods
Required Accessories:
- Remote Blower (except Built-In Blower Models)
- Ductwork
- Base cabinet(s) or stand
- Solid Epoxy Flat Work Surface
Optional Accessories:
- Service Fixture Kits
- Electrical Receptacle Kits
- Cupsink and Turret Kit
- Guardian Airflow Monitor Kit
- Sash Stop Kit
- Right Side Finish Panel Kit
Item ID | Weight | Includes | Hood Type | Overall Width | Overall Height | Explosion Proof | Electrical Requirements | Maximum Static Pressure Loss | Price | Packaging |
---|---|---|---|---|---|---|---|---|---|---|
LCN 2247400 | ||||||||||
LCN 2247400 |
280lb | Incandescent light | Basic™ 47 | 47in | 48in | No | 100-115V, 50/60Hz, 1amp, Domestic | 0.35 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2247401 | ||||||||||
LCN 2247401 |
280lb | Incandescent light | Basic™ 47 | 47in | 48in | No | 208-230V, 50/60Hz, 1 amp, International | 0.35 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2247300 | ||||||||||
LCN 2247300 |
370lb | Incandescent light, Integral blower | Basic™ 47 | 47in | 53in | No | 115V, 60Hz, 6.8 amps, Domestic | 0.25 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2247301 | ||||||||||
LCN 2247301 |
370lb | Incandescent light, Integral blower | Basic™ 47 | 47in | 53in | No | 220V, 50Hz, 5.6 amps, International | 0.25 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2247500 | ||||||||||
LCN 2247500 |
365lb | Explosion-Proof Incandescent Light, Explosion-Proof Integral Blower | Basic™ 47 | 47in | 53in | Yes | 115/208-230V, 60Hz, 7.8/4.4 amps, Domestic or International | 0.25 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2247501 | ||||||||||
LCN 2247501 |
365lb | Explosion-Proof Incandescent Light, Explosion-Proof Integral Blower | Basic™ 47 | 47in | 53in | Yes | 230V, 50Hz, 4.4 amps, International | 0.25 at 100 fpm (720 cfm), in. H2O |
|
|
LCN 2246400 | ||||||||||
LCN 2246400 |
430lb | Incandescent Light | Basic™ 70 | 70in | 48in | No | 100-115V, 50/60Hz, 1amp, Domestic | 0.57 at 100 fpm (1120 cfm), in. H2O |
|
|
LCN 2246401 | ||||||||||
LCN 2246401 |
450lb | Incandescent Light | Basic™ 70 | 70in | 48in | No | 208-230V, 50/60Hz, 1 amp, International | 0.57 at 100 fpm (1120 cfm), in. H2O |
|
|
LCN 2246300 | ||||||||||
LCN 2246300 |
450lb | Incandescent Light, Integral Blower | Basic™ 70 | 70in | 53in | No | 115V, 60Hz, 12.9amps, Domestic | 0.23 at 100 fpm (1120 cfm), in. H2O |
|
|
LCN 2246301 | ||||||||||
LCN 2246301 |
450lb | Incandescent Light, Integral Blower | Basic™ 70 | 70in | 53in | No | 220V, 50Hz, 7amps, International | 0.23 at 100 fpm (1120 cfm), in. H2O |
|
|
LCN 2246501 | ||||||||||
LCN 2246501 |
455lb | Explosion-Proof Incandescent Light, Explosion-Proof Integral Blower | Basic™ 70 | 70in | 53in | Yes | 230V, 50Hz, 6.7amps, International | 0.25 at 100 fpm (1120 cfm), in. H2O |
|
|